Matter Tubular Motor With Built-in Li-battery Instruction (Model: ZM25EL)

The following is the instruction manual for ZM25EL battery tubular motor, including basic information about the blind motor, instructions for setting up the remote control, and instructions for networking the motor with the App (Matter versions), etc.; Please feel free to check!

To begin, let’s take a brief look at the main functions, and parameters of the smart blind motor.

ZM25EL Battery Tubular Motor

Li-battery, Electronic radio, Built-in receiver type

  • Built-in lithium battery
  • Super silent design
  • Power off and position memory function
  • Wireless control: RF remote, ZigBee, Bluetooth
  • Smart home connection
  • Third position limit
  • Inching/ continuation move mode

Technical Parameters

Product modelInput
voltage
Input currentRated PowerRated
RPM
TorqueMax
current
Battery capacityRunning noiseMax load (use with 38mm tube)
ZM25EL- 1.1/25DC 5V2A8W25RPM1.1N.m1A7.4VDC/3000mAh35-40dB5KG
ZM25EL- 0.8/25DC 5V2A8W25RPM0.8N.m1A7.4VDC/3000mAh35-40dB3KG

Button Manual


Of course, in addition to the blind tubular motor, there are remote controls (optional), which have different functions for different models!

Remote Control Instruction


Then, for the statement on setting the 3 limits of the tubular motor, please note the TIPS in the picture below.

Statement of Setting Limit

Operation Instructions

  • Press the “Up / open key”, the blind up.
  • Press the “Down / close key”, the blind down.
  • Press the “Stop key”, the blind stop running.
  • Long press the “Stop key”for 3 seconds, the blind automatically runs to third position (Only works when the third position limit is set).


Okay, let’s get into the instructions for the charging power supply and NOTICE for battery blind motor.

Charging Power Supply Instructions

⚠ LOW BATTERY: The motor will raise an alarm with a voice “Di” to warm low battery.
PIease charge the device then avoid over-discharge to damage motor or abnormal operation.
Full charge the device for 3 hours before first use.
Please charge the device for at least 3 hours every 3 months to prolong the battery life.

Notice

After a general understanding of ZM25EL blind motors, you should be eager to know how to control them, right? Here’s how to control the tubular motor by remote control.

Remote Control and Network Setting Manual

These operations only work for the remote control within the effective control distance, and the motor is in the power-on state, otherwise it doesn’t work.




Up limit setting


Down limit setting


Third position limit setting


You can delete the limit at any position

Delete up limit


Delete down limit


Delete third position limit


The limit back to factory mode (Delete all the limits)


The following functions can be set as personal needs.

Change the remote control direction

When the control direction is opposite, the remote control can be used to switch the direction, and you can repeat the operation to switch.


Inching or continuation move action

When the inching action is needed, perform the following operations. (Repeat this operation can switch back to the continuation move mode.)


Lock or open the remote channel

If you need to hide the extra channels, you can perform the following operations. (Repeat the operation to unlock channel.)

Lock the channel: Do this operation when you have chosen the channel which you want to lock.
Open the channel: Do this operation whatever any channel.
(Repeat this operation for lock or open the channel.)


Delete the remote current channel from the motor


Delete current remote from the motor

To cancel the connection between the motor and current remote all channels.


Delete all remote control from the motor



Matter Curtain Motor Video

How to connect the Matter curtain motor with the phone?(ZM25EL battery blind motor networking same tutorial as in the video)

https://youtu.be/76iOj8gAlCA

Yea~ Knowing how the remote control works, it’s even easier to control the blind motor with the App, This is the Matter version of the 25EL battery tubular motor, please follow the steps in detail!

App User Manual (Matter version motor)

If the motor travel limit is already set, you can proceed directly to network configuration.

Connection setting for motor and remote control


Up limit setting


Down limit setting


Open the Apple Home App

Please make sure your phone and Matter gateway are connected in the same WiFi.

① Connect to your phone’s WiFi
(supports only 2.4G)
② Open the app, click the “+” in the upper right corner, and select “Add Device”
③ Scan the QR code on the
motor or enter the code
④ Add the blinds to your home
⑤ Set the Blinds Location and
click “Continue”
⑥ Set the Blinds Name and click “Continue”
⑦ Set up Blinds Automation
and click “Continue”
⑧ Once the device is successfully
added, click “Done”
⑨ Enter the control interface to manage the device

Table of Contents

Related Wiki

Tell us your needs & expectations

Just take 1-2 minutes to tell us your ideas and requirements by completing the form below, and you will receive a response from a professional & trusted manufacturer within 12 hours.