How can tubular motors be networked? 2 important steps

Table of Contents

How are tubular motors networked? 2 important steps

How are tubular motors networked?

Took on a project and don’t know how to network the curtain motors from ZH when it comes to construction?

Don’t worry, please follow the steps below to connect

1. Make sure the motor is powered. If it is a lithium battery model, please make sure the power switch is turned on.

2. Next, put the motor into networking mode

Method 1: Tap the motor setting key 3 times continuously within 5 seconds, and after the motor shakes, it enters the distribution mode.

Method 2: Make sure the motor has been associated with the remote control, tap the remote control SET key 6 times continuously within 5 seconds, the display shows 6, tap the stop key 1 time within 3 seconds, and the motor shakes, then enter the distribution mode. 
(The premise of using method 2 is that the remote control has been connected to the motor.Just choose one of methods one and two.)

Annotation:

If it is Zigbee version, you need to associate Zigbee gateway, please make sure that the gateway is already working properly, then associate the motor under that gateway.

If it is Bluetooth version, please make sure whether there is Bluetooth gateway.

 – If there is no Bluetooth gateway, only the associated mobile phone can control the motor, and the motor cannot be shared with other members of the family.

– If it is associated with a Bluetooth gateway, the device can be shared for other members to use and remote control is supported.

This method applies to our intelligent motorized roller blinds motors, Motorized zebra shades motors, motorized Shangri-La blinds, Motorized honeycomb blinds, Motorized Roman blinds, venetian blinds, day and night blinds, and a series of lifting roller blinds categories.

Network configuration of the 24 motor

However, the 24 motors have different set key positions, please see the picture below:

Incidentally: The curtain  motors are also applicable, except that after the set key is pressed three times in a row, the curtain motor does not shake into networking mode, but the indicator light blinks into networking mode.

But the setting method is the same

Click to view the video

For more, click here for more information

Related Post

Tell us your needs & expectations

Just take 1-2 minutes to tell us your ideas and requirements by completing the form below, and you will receive a response from a professional & trusted manufacturer within 12 hours.